Uconnect Customer Programmable Features
The Uconnect system allows you to access Customer Programmable feature settings
such as Display, Voice, Clock, Safety & Driving Assistance, Lights, Doors & Locks,
Auto-On Comfort, Engine Off Options, Compass Settings (Uconnect 5.0,) Trailer
Brake, Suspension, Audio, Phone/Bluetooth, SiriusXM Setup, Restore Settings,
Clear Personal Data, and System Information through buttons on the touchscreen.
• Push the SETTINGS button (Uconnect 5.0), or press the “Apps” button
(Uconnect 8.4) located near the bottom of the touchscreen, then press the
“Settings” button on the touchscreen to access the Settings screen. When making
a selection, scroll up or down until the preferred setting is highlighted, then press
the preferred setting until a check-mark appears next to the setting, showing that
setting has been selected. The following feature settings are available:
• Display
• Suspension
• Voice
• Audio
• Clock
• Phone/Bluetooth
• Safety & Driving Assistance
• SiriusXM Setup
• Lights
• Restore Settings
• Doors & Locks
• Clear Personal Data
• Auto-On Comfort
• System Information
• Engine Off Options
• Compass Settings (Uconnect 5.0)
• Trailer Brake
NOTE:
Depending on the vehicles options, feature settings may vary.
Refer to “Uconnect Settings/Customer Programmable Features” found within “Un-
derstanding Your Instrument Panel” located in your Owner's Manual on
www.ramtrucks.com/en/owners/manuals for further information.
Instrument Cluster Reconfigurable Screen Setup
The following settings allow you to change what information is displayed in the
instrument cluster as well as the location that information is displayed.
Digital Speedometer
• Push the
up
or
down
arrow button until the Digital display icon is highlighted in the
instrument cluster display. Push the
right
arrow button to change the display
between km/h and mph.
E L E C T R O N I C S
195
Содержание 1500 2017
Страница 7: ...INTRODUCTION WELCOME 5 ...
Страница 369: ...NOTES 367 ...
Страница 370: ...NOTES 368 ...