RAM Commercial PROMASTER Cargo Van 2019, Руководство пользователя, Страница: 34 / 164

• MODE Button
Push and hold the MODE button for a time
longer than one second to access/select the
information screens or submenu screens of
a main menu item. Push and hold the
MODE
button for two seconds to reset displayed/
selected features that can be reset.
• Up Arrow Button
Push and release the up arrow button to
scroll upward through the main menu and
submenus or adjust the illumination on the
instrument panel when the headlights are
on.
• Down Arrow Button
Push and release the down arrow button to
scroll downward through the main menu
and submenus or adjust the illumination on
the instrument panel when the headlights
are on.
Change Engine Oil
Your vehicle is equipped with an engine oil
change indicator system. The “Change En-
gine Oil” message will display in the instru-
ment cluster display. The engine oil change
indicator system is duty cycle based, which
means the engine oil change interval may
fluctuate, dependent upon your personal
driving style.
Unless reset, this message will continue to
display each time you turn the ignition switch
to the ON/RUN position. To turn off the
message temporarily, push and release the
MODE button. To reset the oil change indica-
tor system (after performing the scheduled
maintenance), refer to the following proce-
dure.
1. Turn the ignition switch to the ON position
(do not start the engine).
2. Fully push the accelerator pedal slowly,
three times, within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK
position.
NOTE:
If the indicator message illuminates when
you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
WARNING LIGHTS AND MESSAGES
The warning/indicator lights will illuminate in
the instrument panel together with a dedi-
cated message and/or acoustic signal when
applicable. These indications are indicative
and precautionary and as such must not be
considered as exhaustive and/or alternative
to the information contained in the Owner’s
Manual, which you are advised to read care-
fully in all cases. Always refer to the informa-
tion in this chapter in the event of a failure
indication. All active telltales will display first
if applicable. The system check menu may
appear different based upon equipment op-
tions and current vehicle status. Some tell-
tales are optional and may not appear.
GETTING
TO
KNOW
YOUR
INSTRUMENT
P
ANEL
32