RAM Commercial PROMASTER Cargo Van 2019, Руководство пользователя, Страница: 29 / 164

HOOD
Opening
To open the hood, two latches must be re-
leased.
1. Open the driver’s door to gain access to
the hood release lever. Pull the hood re-
lease lever located on the side of the
instrument panel.
2. Move to the outside of the vehicle, reach
into the opening beneath the center of the
hood and push the safety latch lever to the
right to release it, before raising the hood.
3. Raise the hood and place the hood prop
rod in hood slot to secure the hood in the
open position.
Closing
WARNING!
Be sure the hood is fully latched before
driving your vehicle. If the hood is not fully
latched, it could open when the vehicle is
in motion and block your vision. Failure to
follow this warning could result in serious
injury or death.
CAUTION!
To prevent possible damage:
• Before closing hood, make sure the hood
prop rod is fully seated into its storage
retaining clips.
• Do not slam the hood to close it. Use a
firm downward push at the center front
edge of the hood to ensure that both
latches engage. Never drive your vehicle
unless the hood is fully closed, with both
latches engaged.
Hood Release
27