RAM Commercial ProMaster 2024, Руководство пользователя, Страница: 86 / 284

Automatic High Beam Indicator Light —
If Equipped
This indicator shows that the automatic high
beam headlights are on
page 47.
Cruise Control Indicator Light —
If Equipped
This indicator light will illuminate when the
cruise control is activated
page 99.
NOTE:
There will be no change in the indicator light when the
desired speed is set.
Front Fog Indicator Light — If Equipped
This indicator light will illuminate when the
front fog lights are on
page 47.
Parking/Headlights On Indicator Light
This indicator light will illuminate when the
parking lights or headlights are turned on
page 47.
Plug Status Indicator Light
When plugged in, the green plug indicator
light will illuminate if the Electric Vehicle
Supply Equipment (EVSE) charging plug is
securely attached to the charging port. This
indicates that the plug is detected, but doesn't mean it
is charging. It will be accompanied with a cluster mes-
sage indicating the charge status:
•
“Plugged In And Charging”
•
“Plugged In And Waiting to Charge On A Set
Schedule”
•
“Plugged in and Charging Complete”
NOTE:
The vehicle cannot be driven until it is unplugged.
Ready To Drive Indicator Light
This indicator light will illuminate to indicate
that the vehicle has enough power to be
driven, regardless of the speed of the
vehicle.
Turn Signal/Hazard Warning Indicator
Lights
The turn signal arrows will flash indepen-
dently when left or right turn signals are
selected. Turn signals can be activated when
the multifunction lever is moved down (left)
or up (right).
Pressing the Hazard Warning Flashers button will illumi-
nate both right and left turn signal arrows simultane-
ously
page 186.
NOTE:
Check for an inoperative outside light bulb if either indi-
cator flashes at a rapid rate.
BLUE INDICATOR LIGHTS
High Beam Indicator Light
This indicator light will illuminate to indicate
that the high beam headlights are on. With
the low beams activated, push the multifunc-
tion lever forward (toward the front of the
vehicle) to turn on the high beams. Pull the multifunc-
tion lever rearward (toward the rear of the vehicle) to
turn off the high beams. If the high beams are off, pull
the lever toward you for a temporary high beam on,
“flash to pass” scenario.
WHITE INDICATOR LIGHTS
Adaptive Cruise Control (ACC) Set With
Target Indicator Light — If Equipped
This will display when the ACC is set and a
vehicle in front is detected
page 99.
Active Lane Management Indicator
Light — If Equipped
When the Active Lane Management system
is ON, but not armed, the Active Lane Man-
agement indicator light illuminates solid
white. This occurs when only left, right, or
neither lane line has been detected. If a single lane line
is detected, the system is ready to provide only visual
warnings if an unintentional lane departure occurs on
the detected lane line
page 121.
84 GETTING TO KNOW YOUR INSTRUMENT PANEL