RAM Commercial ProMaster 2024, Руководство пользователя, Страница: 73 / 284

responders immediately. Even if you do not see
flames, a fire may start at any moment, so do not
attempt to re-enter or start the vehicle.
CHANGE ENGINE OIL —
IF EQUIPPED
Use this QR code to access your digital
experience.
Your vehicle is equipped with an engine
oil change indicator system. The
“Change Engine Oil” message will dis-
play in the instrument cluster display.
The engine oil change indicator system is duty cycle
based, which means the engine oil change interval may
fluctuate, dependent upon your personal driving style.
Unless reset, this message will continue to display each
time you turn the ignition switch to the ON/RUN posi-
tion. To turn off the message temporarily, push and
release the
OK
button. To reset the oil change indicator
system (after performing the scheduled maintenance),
refer to the following procedure.
1. Turn the ignition switch to the ON position (do not
start the engine).
2. Fully push the accelerator pedal slowly, three times,
within 10 seconds.
3. Turn the ignition switch to the OFF position.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset. If
necessary, repeat this procedure.
MAIN MENU
NOTE:
All of the following items are accessed by pressing the
OK
button.
Home with Enhanced Speedometer —
If Equipped
This option features an enhanced bar graph speedom-
eter to visually represent current speed. When a speed
control system is active, the graph also provides visual
cues for the different states of that particular speed
control system.
Trip
Vehicles with 7 Inch Instrument Cluster Display
Access to trip information is available through the fol-
lowing submenus.
•
Instant Fuel Consumption
– Shows the instant con-
sumption in real time (MPG or L/100 km or km/L).
•
Average Fuel Economy
– Shows the average con-
sumption (MPG or L/100 km or km/L) of Trip A or
Trip B since the last reset.
•
Distance — If Equipped
– Shows the total distance
(mi or km) traveled for Trip A or Trip B since the last
reset.
•
Distance to Empty
– Shows the remaining range till
empty (mi or km).
•
Average Speed
– Shows the average speed (MPH or
KM/H) of Trip A or Trip B since the last reset.
•
Travel Time
– Shows the total elapsed time of travel
since Trip A or Trip B has been reset.
Hold the
OK
button to reset feature information.
NOTE:
During the reset the instruction line disappears and a
bar graph appears to indicate the resetting status;
when the bar graph is full the reset is complete.
Battery Electric Vehicle with 7 Inch Instrument Cluster
Display
Access to trip information is available through the fol-
lowing submenus.
• Instant Fuel Consumption
– Shows the instant con-
sumption in real time (MPGe or mi/kWh or kWh/mi
or kWh/100 km or km/Kwh).
•
Average Fuel Economy
– Shows the average con-
sumption (MPGe or mi/kWh or Kwh/mi or kWh/100
km) of Trip A or Trip B since the last reset.
•
Distance — If Equipped
– Shows the total distance
(mi or km) traveled for Trip A or Trip B since the last
reset.
•
Average Speed
– Shows the average speed (MPH or
KM/H) of Trip A or Trip B since the last reset.
•
Travel Time
– Shows the total elapsed time of travel
since Trip A or Trip B has been reset.
Hold the
OK
button to reset feature information.
NOTE:
During the reset the instruction line disappears and a
bar graph appears to indicate the resetting status;
when the bar graph is full the reset is complete.
Vehicles with 3.5 Inch Instrument Cluster Display
•
Instant Information
– Shows the instantaneous con-
sumption (MPG or L/100 km or km/L) and distance
to empty (mi or km).
•
Trip A
– Shows the total distance (mi or km) trav-
eled, the total elapsed time of travel, average con-
sumption (MPG or L/100 km or km/L), and the aver-
age speed (MPH or KM/H).
Scan me
GETTING TO KNOW YOUR INSTRUMENT PANEL 71
3