RAM Commercial ProMaster 2024, Руководство пользователя, Страница: 65 / 284

2. Move to the outside of the vehicle, reach into the
opening beneath the center of the hood and push
the safety latch lever upwards to release it, before
raising the hood.
3. Raise the hood and place the hood prop rod in hood
slot to secure the hood in the open position.
NOTE:
•
Vehicle must be at a stop and the gear selector
must be in PARK.
•
You may have to push down slightly on the hood
before pushing the safety latch.
•
While lifting the hood, use both hands.
•
Before lifting the hood, check that the wiper arms
are not in motion and not in the lifted position.
•
For BEV Models:
If the vehicle was actively charging
the high voltage battery when the hood was opened,
the vehicle will stop charging until the hood is
closed.
•
For BEV models:
Electric drive mode will not be
available while the hood is open. A message will
show in the instrument cluster display to alert the
driver.
CAUTION!
Be sure to disengage the rod and secure it in closed
position before closing the hood. Damage may occur.
CLOSING
WARNING!
Be sure the hood is fully latched before driving your
vehicle. If the hood is not fully latched, it could open
when the vehicle is in motion and block your vision.
Failure to follow this warning could result in serious
injury or death.
CAUTION!
To prevent possible damage:
•
Before closing hood, make sure the hood prop rod
is fully seated into its storage retaining clips.
•
Do not slam the hood to close it. Use a firm down-
ward push at the center front edge of the hood to
ensure that both latches engage. Never drive your
vehicle unless the hood is fully closed, with both
latches engaged.
CARGO AREA FEATURES
The cargo area may be equipped with different options
such as optional side panels, rear seats and an
optional floor.
Hood Safety Latch Lever Location
Hood Prop Rod Slot
GETTING TO KNOW YOUR VEHICLE 63
2