RAM Commercial ProMaster 2024, Руководство пользователя, Страница: 108 / 284

STATIONARY OBJECTS AND VEHICLES
ACC does not react to stationary objects or vehicles. For
example, ACC will not react in situations where the
vehicle you are following exits your lane and the vehicle
ahead is stopped in your lane. It will consider this
stopped vehicle a stationary object as it did not previ-
ously detect movement from it. Always be attentive and
ready to apply the brakes if necessary.
TRAFFIC SIGN ASSIST SYSTEM —
IF EQUIPPED
The Traffic Sign Assist (TSA) system uses a camera
mounted on the windshield, as well as map data when
the vehicle is equipped with Navigation, to detect recog-
nizable road signs such as:
•
Speed limits
•
School zones
•
No passing zones
NOTE:
•
The TSA system will automatically display the road
sign detected in the unit of measurement (mph
or km/h) selected within Uconnect Settings or within
the instrument cluster display.
•
If no speed limit signs are detected, the system will
revert to the speed limit signs that are stored in the
Navigation system.
•
The system always checks the traffic signs indicat-
ing the current speed limit signs. The system is able
to recognize and display up to two different road
signs in the instrument cluster display.
ACTIVATION/DEACTIVATION
The TSA System can be enabled/disabled within the
Uconnect system through the Safety/Driver Assistance
menu. System ON is signaled by road signs shown on
the instrument cluster display.
NOTE:
Even if the system is OFF, the speed limit sign will be
displayed when the driver selects it in the HOME
screen.
TRAFFIC SIGN ASSIST MODES
TSA has three selectable modes of operation that are
available through the Uconnect system.
Visual
When Visual is selected, the system will alert the driver
when the current speed of the vehicle exceeds the
detected speed limit by showing a graphic in the instru-
ment cluster display.
Chime
When Chime is selected, the system will alert
the driver when the current speed of the vehicle
exceeds the detected speed limit by showing a graphic
in the instrument cluster display, and by sounding an
audible alert. The audible alert will last for 10 seconds,
and the visual alert will remain on as long as the
vehicle is exceeding the speed limit.
TSA Off
When the TSA system is turned off, the system will not
show any traffic signs (unless selected in the HOME
screen, which will show detected speed limit signs), and
no alerts will be issued to the driver.
INDICATIONS ON THE DISPLAY
Detected traffic signs are shown in the instrument clus-
ter display, and can display any combination of signs at
one time (e.g. speed limit, speed limit and supplemen-
tal info, and “Do Not Pass” signs) depending on what
information is available.
When a newly detected speed limit is higher than the
current speed limit, the display will update along with
an up arrow.
When a newly detected speed limit is lower than the
current speed limit, the display will update along with a
down arrow.
NOTE:
Up or down arrows will be displayed for up to five
seconds.
Stationary Object And Stationary Vehicle Example
106 STARTING AND OPERATING