RAM Commercial Chassis Cab 3500 2019 Скачать руководство пользователя страница 91

Страница: 91 / 607

GETTING TO KNOW YOUR VEHICLE

Automatic Temperature Control (ATC)

Automatic Operation

1. Push the AUTO button on the faceplate, or the AUTO

button on the touchscreen on the Automatic Temperature

Control (ATC) Panel.

2. Next, adjust the temperature you would like the system

to maintain by adjusting the driver and passenger

temperature control buttons. Once the desired tempera

ture is displayed, the system will achieve and automati

cally maintain that comfort level.

3. When the system is set up for your comfort level, it is not

necessary to change the settings. You will experience the

greatest efficiency by simply allowing the system to func

tion automatically.

NOTE:

• It is not necessary to move the temperature settings for

cold or hot vehicles. The system automatically adjusts the

temperature, mode, and blower speed to provide comfort

as quickly as possible.

• The temperature can be displayed in U.S. or Metric units

by selecting the US/Metric customer-programmable

feature. Refer to the “Uconnect Settings” in “Multimedia”

for further information.

To provide you with maximum comfort in the Automatic

mode during cold start-ups, the blower fan will remain on

low until the engine warms up. The blower will increase in

speed and transition into Auto mode.

Manual Operation Override

This system offers a full complement of manual override

features. The AUTO symbol in the front ATC display will be

turned off when the system is being used in the manual

mode.

Operating Tips

NOTE:

Refer to the chart at the end of this section for suggested

control settings for various weather conditions.

Содержание Chassis Cab 3500 2019
































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

Похожие инструкции для Chassis Cab 3500 2019

Бренды по названию

Популярные бренды

RAM Commercial Chassis Cab 3500 2019, Руководство пользователя

Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

Похожие инструкции для Chassis Cab 3500 2019

Бренды по названию

Популярные бренды