RAM Commercial CHASSIS CAB 2020 Скачать руководство пользователя

Страница: 252 / 516

250

STARTING AND OPERATING



When you move the gear selector into

REVERSE with ParkSense turned off, the

instrument cluster display will show "Off" on

the vehicle graphic arcs for as long as the

vehicle is in REVERSE.



ParkSense, when on, will reduce the volume

of the radio when it is sounding a tone.



Clean the ParkSense sensors regularly,

taking care not to scratch or damage them.

The sensors must not be covered with ice,

snow, slush, mud, dirt or debris. Failure to do

so can result in the system not working prop

erly. The ParkSense system might not detect

an obstacle behind the fascia/bumper, or it

could provide a false indication that an

obstacle is behind the fascia/bumper.



Ensure the ParkSense system is off if objects

such as bicycle carriers, trailer hitches, etc.,

are placed on the fascia/bumper while

driving the vehicle. Failure to do so can result

in the system misinterpreting a close

obstacle as a sensor problem, causing the

“Wipe Sensors” message or providing false

alerts.

PARKSENSE FRONT AND REAR PARK ASSIST

The ParkSense Front and Rear Park Assist

system provides visual and audible indications

of the distance between the rear, and/or front

fascia/bumper, and a detected obstacle when

backing up or moving forward (e.g. during a

parking maneuver).
Refer to “ParkSense System Usage Precau

tions” in this section for limitations of this

system and recommendations.

WARNING!



Drivers must be careful when backing up

even when using ParkSense. Always check

carefully behind your vehicle, look behind

you, and be sure to check for pedestrians,

animals, other vehicles, obstructions, and

blind spots before backing up. You are

responsible for safety and must continue to

pay attention to your surroundings. Failure

to do so can result in serious injury or

death.



Before using ParkSense, it is strongly

recommended that the ball mount and

hitch ball assembly is disconnected from

the vehicle when the vehicle is not used for

towing. Failure to do so can result in injury

or damage to vehicles or obstacles

because the hitch ball will be much closer

to the obstacle than the rear fascia when

the loudspeaker sounds the continuous

tone. Also, the sensors could detect the ball

mount and hitch ball assembly, depending

on its size and shape, giving a false indica

tion that an obstacle is behind the vehicle.

CAUTION!



ParkSense is only a parking aid and it is

unable to recognize every obstacle,

including small obstacles. Parking curbs

might be temporarily detected or not

detected at all. Obstacles located above or

below the sensors will not be detected

when they are in close proximity.



The vehicle must be driven slowly when

using ParkSense in order to be able to stop

in time when an obstacle is detected. It is

recommended that the driver looks over

his/her shoulder when using ParkSense.

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 250

Содержание CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы:

Похожие инструкции для CHASSIS CAB 2020

Бренды по названию

Популярные бренды

RAM Commercial CHASSIS CAB 2020, Руководство пользователя

Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы:

Похожие инструкции для CHASSIS CAB 2020

Бренды по названию

Популярные бренды