RAM Commercial CHASSIS CAB 2020 Скачать руководство пользователя

Страница: 237 / 516

STARTING AND OPERATING

235

To Set A Desired ACC Speed

When the vehicle reaches the speed desired,

push the SET (-) button and release. The instru

ment cluster display will show the set speed.
If the system is set when the vehicle speed is

below 20 mph (32 km/h), the set speed shall

be defaulted to 20 mph (32 km/h). If the

system is set when the vehicle speed is above

20 mph (32 km/h), the set speed shall be the

current speed of the vehicle.

NOTE:

ACC cannot be set if there is a stationary vehicle

in front of your vehicle in close proximity.

Remove your foot from the accelerator pedal,

after the ACC has been set. If you do not, the

vehicle may continue to accelerate beyond the

set speed. If this occurs:



The message “ACC DRIVER OVERRIDE” will

display in the instrument cluster display.



The system will not be controlling the

distance between your vehicle and the

vehicle ahead. The vehicle speed will only be

determined by the position of the accelerator

pedal.

To Cancel

The following conditions cancel the system:



The brake pedal is applied.



The CANCEL button is pushed.



An Anti-Lock Brake System (ABS) event

occurs.



The gear selector is removed from the DRIVE

position.



The Electronic Stability Control/Traction

Control System (ESC/TCS) activates.



The vehicle parking brake is applied.



Driver seatbelt is unbuckled at low speeds.



Driver door is opened at low speeds.



A Trailer Sway Control (TSC) event occurs.



The driver switches ESC to Full Off mode.



The braking temperature exceeds normal

range (overheated).



The trailer brake is applied manually (if

equipped).

To Turn Off

The system will turn off and clear the set speed

in memory if:



The Adaptive Cruise Control (ACC) on/off

button is pushed.



The Normal (Fixed Speed) Cruise Control on/

off button is pushed.



The ignition is placed in the OFF position.



You switch to Four-Wheel Drive Low.

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 235

Содержание CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы:

Похожие инструкции для CHASSIS CAB 2020

Бренды по названию

Популярные бренды

RAM Commercial CHASSIS CAB 2020, Руководство пользователя

Результаты поиска

Содержание CHASSIS CAB 2020

Отзывы:

Похожие инструкции для CHASSIS CAB 2020

Бренды по названию

Популярные бренды