●
Take note of the attached Bosch original instructions if you wish to operate your
cargo bike.
5.6 Residual risks
Use of your cargo bike is associated with the following unforeseeable residual risks
despite adherence to all safety instructions:
●
Do not breathe in any gases or vapours which are emitted. Prevent skin contact
with liquids which are emitted. The battery may combust due to internal, non-visible
damage and ignite objects in its vicinity.
●
Do not attempt to extinguish a battery fire yourself.
●
Keep your distance from the battery. Allow the battery to burn out in a controlled
fashion. If the battery is burning, hydrofluoric acid will be emitted with the flue gas.
Hydrofluoric acid is highly corrosive and will cause permanent damage to surfaces.
●
Do not use damaged batteries.
Warning: Invisible internal damage and fire can cause gases, vapours, and liquids to
escape from the battery. Avoid physical contact with these substances!
5.7 Error code display
The cargo bike system’s components are continuously and automatically monitored.
If an error is detected, the corresponding error code is displayed on the on-board
computer. The drive may be automatically shut down, depending on the type of
error. However, if you wish to continue cycling, you will always be able to do so
without assistance from the drive. Check the full Bosch manual or bosch-ebike.com
for all the possible error codes.
Code Reason
Corrective measures
410
One or more buttons of the
on- board computer are
disabled
Check whether any buttons are stuck e.g., as a
result of dirt finding its way in. Clean the buttons if
need be.
414
Operating unit connection
problem
Have the connections checked.
430
Internal battery of the
onboard computer is flat
Charge the on-board computer (in the holder or via
the USB port) or by changing the battery in case of
the Purion display.
503 Speed sensor error
Restart the system. If the problem persists, contact
your Raleigh Stride dealer.
