Ralco R 221 ACS DHHS Series, Инструкция по эксплуатации

Страница: 47 / 245

MTR 221 ACS - MTR 221 ACS DHHS
MANUALE ISTRUZIONI / INSTRUCTION MANUAL
E
LECTRONIC
S
YSTEM
39
Model R 221 ACS - R 221 ACS DHHS
MT
R
2
21
ACS
-
MTR
2
21
AC
S DHH
S - Electronic Syste
m
ELECTRONIC SYSTEM
This section describes the collimator control system which includes:
• GC007 (Master) - Electronic board which controls via CAN Bus (CAN Open on request)
the two stepper motors of square field and one motor for filter positioning.
• GC009 (Slave) - Electronic board which controls the display, inclinometer and 2 encoders.
The board receives the power (5 V) and commands from the GC 007.
• GC-Led-4A - Timer board for light source supply and operation.
• GC 24 V - AC/DC power supply converter.
GC 007 B
OARD
Characteristics
• CANBus Interface 500 Kbit/s default (from 125 Kbit/s to 1 Mbit/s).
• ID node 64 default (from 1 to 255).
• Supply 24 V DC.
• CANBus opto-isolated mode (OFF default).
• Connector for programming.
J2 - CAN Bus (+12/24 V DC) 1-2 +Vcan
3-4 CAN L
5-6 CAN H
7-8 GCAN