MTR 221 ACS - MTR 221 ACS DHHS
MANUALE ISTRUZIONI / INSTRUCTION MANUAL
O
PTIONAL
I
TEMS
176
Model R 221 ACS - R 221 ACS DHHS
MT
R
2
21
ACS
-
MTR
2
21
AC
S DHH
S - Optio
nal Ite
m
s
The four formats can be changed in the following way:
• Set the 4 shutters to the desired position.
• Press and do not release the format push button (eg: C) for the setting to be stored. The
collimator stores the new format after about 5 seconds, informing the user by lighting the
red LED (remote reception) on the front panel for a few seconds.
• Release the format push button on the remote control.The new format is automatically
stored in permanent memory.
CAN Bus messages:
The controls are standard commands of Ralco’s protocol:
0x7A0 controls the 4 shutters simultaneously in 1/10 mm.
0x7A4 controls one shutter at a time (1-4), or the filter motor (5)
,
etc.
0x7A8 manual handling.
W
ARNING
T
HE
ANTI
-
COLLISION
CONTROL
OF
A
PAIR
OF
SHUTTERS
IS
DISABLED
FOR
THE
MANUAL
HANDLING
.
Customized commands:
id=7AE dlc=8 D0=0x01 D1 sets the type of collimator (A or B) remote control code
D1 = 0x01 collimator A
D1 = 0x02 collimator B
Data is stored in the permanent memory
RO 484 Infrared Remote Control Box
This accessory runs two collimators at the
same time (Coll.A and Coll.B)
Collimator features:
• Light push button, the light is automati-
cally set for 30 seconds (
1
).
• Laser push button
,
the laser is automati-
cally set for 60 seconds (
2
).
• 8 push buttons (
3
) for manual opening
and closing of each blade, identified by
drawing.
• 4 push buttons (
4
) for selecting the filter
(0,1,2,3).
• 4 push buttons (
5
) for choosing 4 different
formats (A, B, C, D). See CAN Bus
commands below.
1
3
4
5
2
Содержание R 221 ACS DHHS Series
Страница 7: ...MTR 221 ACS MTR 221 ACS DHHS MTR 221 ACS MTR 221 ACS DHHS 3...
Страница 8: ...MTR 221 ACS MTR 221 ACS DHHS MTR 221 ACS MTR 221 ACS DHHS 4...
Страница 245: ...info_cl fm...
