13
9 Mappings
When Mappings are used the HUB can “listen” to a Rako command (Source) and perform a
certain action (Output Action) every time it is “heard”.
NB
It is usually preferable to use a programmable keypad rather than HUB Mapping when possible.
Where WCMs are RNCs are used in the system use
Keypad Mapping
rather than HUB Mapping.
9.1 Mapping wireless commands to give multi-room functionality
Wireless commands can be mapped to additional wireless commands to make multiple
rooms turn on at once. In the example below the “Hall Scene 1” is mapped to also trigger
“Kitchen Scene 1”.
NB
It is also possible to “Enable” and “Disable” maps from other commands via the “Mapping Control”
Action.
WK-HUB
Manual Version 1.3.4
