7
6 Downloading the project file
If information has been uploaded to the Bridge then it is possible to import the Room,
Channel and Scene data into a blank project file. This is useful when working on an
installation with a new project file.
The tab used for downloading information from the Bridge is called “
Room Import
” select it
to open the page below.
-
Step 1:
Press the “Download Data” at the top of this page. This will open the data for
preview on this page.
-
Step 2:
Press “Refresh List” if the rooms do not appear. If they still do not appear
then there is nothing to be downloaded from the Bridge.
-
Step 3:
Press “Import Data” to write the Room and Channel information in to the
Project File.
-
Step 4:
Press “Refresh Channel Levels” to write the Scene data in to the Project File.
WA-Bridge
Manual Version 2.1.3
