11
RA
K52
05
RAK7200 User Manual V1.1
RAK
7200
4
Upgrade Firmware
You can download the firmware of RAK7200 from here:
https://www.rakwireless.com/en/download/LoRa/RAK7200_Tracker_Device#Firmware
It is recommended to use Flash Loader Demonstrator to upgrade firmware.
You can download Flash Loader Demonstrator from :
https://www.rakwireless.com/en/download/LoRa/RAK811#Tools
Upgrade Steps :
1. Firstly connect the RAK7200 device to PC via microUSB and find the COM port. Then
open the Flash Loader Demonstrator and select the corresponding RAK7200 COM port and
set Baud Rate to “115200”, as shown in the following figure.
Figure 10 | Upgrade Steps 1
2. Enable the device to enter the BOOT mode(Press and hold the BOOT button of your
device, and then press the reset button), then click the ‘next’ to proceed.
