Documentation Center
RAK11200 WisBlock WiFi Module Datasheet
Overview
Description
RAK11200 is a WisBlock Core module for RAK WisBlock based on Espressif ESP32-WROVER. It is a powerful,
generic WiFi-BLE MCU module that targets a wide variety of applications. There are two CPU cores that can be
individually controlled and the CPU clock frequency is adjustable from 80 MHz to 240 MHz. The low-power deep-
sleep current consumption of the ESP32-WROVER is about 10 uA. This makes the RAK11200 an ultra-low-power
communication solution. RAK11200 can be comfortably programmed with the Arduino™ IDE or PlatformIO.
Features
Two low-power Xtensa® 32-bit LX6 microprocessors
Up to 240 MHz CPU clock
Built-in PCB antenna
4 MB External SPI Flash, 520 KB RAM
8 MB SPI Pseudo static RAM (PSRAM)
WiFi 802.11 b/g/n (802.11n up to 150 Mbps)
Bluetooth v4.2 BR/EDR and BLE specification
Rich set of peripherals: RTC, UART, I2C, SPI, SD card interface
low-power deep-sleep mode
Specifications
Overview
Board Overview
The RAK11200 WisBlock WiFi Module back view and front view (top) can be seen in Figure 1.
Figure 1: RAK11200 WiFi Module Overview
Mounting Sketch
Figure 2 shows RAK11200 module mounting sketch with the WisBase RAK5005-O board.
