RAIS VIVA L Series, Руководство по установке и эксплуатации, Страница: 43 / 55

22 / 34
OPERATING INSTRUCTIONS FOR OEM USE ONLY
© 2016 Mertik Maxitrol GmbH & Co. KG,
All Rights Reserved.
Program Mode
selected
1 2
ON
AM
PM
OFF
ON TIME SETTING (PROGRAM 1):
7. , , displayed, is displayed
shortly, and hour flashes.
8. To select hour press or button.
9. To confirm press button. , ,
displayed, displayed shortly,
and minutes flash.
10. To select minutes press or but-
ton.
11. To confirm press button.
OFF TIME SETTING (PROGRAM 1):
1 2
ON
AM
PM
OFF
12. , , displayed, is displayed
shortly, and hour flashes.
13. To select hour, press or button.
14. To confirm press button. , ,
displayed, displayed short-
ly, and minutes flash.
15. To select minutes press or but-
ton.
16. To confirm press button.
NOTE: Either continue to PROGRAM 2 and set on and off times
or stop programming at this point, and PROGRAM 2 re-
mains deactivated.
NOTE: PROGRAM 1 and 2 use the same on (Thermostatic) and
off temperatures for , and Daily Timer ( , , , ,
, , ). Once a new on (Thermostatic) and / or off tem-
perature has been set, that temperature becomes the new
default setting.
NOTE: If , or Daily Timer are programmed for PRO-
GRAM 1 and PROGRAM 2 on and off times, these be-
come the new default times. The batteries must be re-
moved to clear the PROGRAM 1 and PROGRAM 2 on
and off times and temperatures.
or Daily Timer ( , , , , , , ) selected
▪ Set on time and off time using same procedure as “ se-
lected ” (above).
▪ : Set on time and off time for both Saturday and Sunday.
▪ Daily Timer: Unique on and off times may be set for a single
day of the week, for multiple days of the week, or for every day
of the week.
▪ Wait to finish setting.
MYFIRE APP
NOTICE
Before the App can be used, the myfire Wi-Fi Box must be wired
and plugged into mains power according to myfire App setup
diagram (see figure 20, page 12), and the App setup must be
completed (see myfire App setup, page 15).
1 2
ON
AM
PM
OFF
If Thermostatic or Program Mode is ac-
tivated, the corresponding icon and
“ ” is displayed on the handset.
The modes can be operated according
to the descriptions on previous pages.
NOTE: In Manual Mode “ ” is NOT
displayed on the handset.