RAIS VIVA L Series, Руководство по установке и эксплуатации, Страница: 2 / 55

3
IMPORTANT SAFETY INFORMATION 4
SPECIFICATIONS 6
INSTALLATION 7
MASSACHUSETTS REQUIREMENTS 8
VENTING 9
ELECTRICAL CONNECTIONS & WIRING DIAGRAM 16
ASSEMBLY 17
CONVERSION TO REAR VENT 22
GAS CONNECTION 20
FINE-TUNING 21
LIGHTING AND OPERATION 22
MAINTENANCE 28
MAINTENANCE LOG FORMS 30
PARTS LIST 28
INSTALLATION RECORD FORM 29
APPENDIX 30
WE STRONGLY SUGGEST THAT YOU READ THIS MANUAL THOROUGHLY BEFORE BE-
GININNG THE INSTALLATION OF THE RAIS GAS STOVE. ALTHOUGH THE BASIC RE-
QUIREMENTS FOR THE INSTALLATION OF ALL DIRECT VENT GAS HEATERS ARE
SIMILAR, EACH SPECIFIC PRODUCT HAS ITS OWN UNIQUE SET-UP AND INSTALLATION
REQUIREMENTS THAT MUST BE FOLLOWED EXACTLY. PLAN YOUR INSTALLATION IN
ADVANCE BY CAREFULLY REVIEWING ALL THE INFORMATION CONTAINED IN THIS
MANUAL.
4
The installation must conform with local codes or, in the absence of local codes, with the National
Fuel
Gas Code, ANSI Z223.1 or the Canadian Installation Code, CAN/CGA B149.
A manufactured home (USA only) or mobile home OEM installation must conform with the
Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 or when such a
standard is not applicable, the Standard for Manufactured Home Installations, ANSI/BCSBCS
A225.1, or Standard for Gas Equipped Recreational Vehicles and Mobile Housing, CSA Z240.4.
The appliance and its appliance main gas valve must be disconnected from the gas supply piping
system
during any pressure testing of that system at test pressures in excess of 1/2 psi (3.5 kPa).
The appliance must be isolated from the gas supply piping system by closing its equipment shutoff
valve during any pressure testing of the gas supply piping system at test pressures equal to or less
than 1/2 psi (3.5 kPa).
The installation must provide for adequate ventilation air to the appliance.
This gas appliance must not be connected to a chimney flue serving a separate solid-fuel burning
appliance.
The appliance, when installed, must be electrically grounded in accordance with local codes, or, in
the absence of local codes, with the National Electrical Code ANSI/NFPA 70, or the Canadian
Electrical Code, CSA C22. 1.
When the appliance is installed directly on carpeting or non-ceramic tile or other combustible material
other than wood flooring, the appliance shall be installed on a metal or wood panel extending the full
width and depth of the appliance. A commercially available hearth pad meets this requirement.
The appliance area must be kept clear and free from combustible materials, gasoline and other
flammable vapors and liquids.
The flow of combustion and ventilation air must not be obstructed.
Do not use this appliance if any part has been under water. Immediately call a qualified service
technician to inspect the appliance and to replace any part of the control system and any gas control
which has been under water.
Due to high temperatures, the appliance should be located out of traffic and away from furniture and
draperies.
Children and adults should be alerted to the hazards of high surface temperatures and should stay
away to avoid burns or clothing ignition.
Young children should be carefully supervised when they are in the same room as the appliance.
Toddlers, young children and others may be susceptible to accidental contact burns. A physical
barrier is recommended if there are at-risk individuals in the house. To restrict access to a fireplace