manualshive.com logo in svg

Rainbow Play Systems Carnival series, Руководство по сборке

Поделиться
Скачать
Rainbow Play Systems Carnival series Скачать руководство пользователя страница 1

Turbo Carnival 

Clubhouse

Carnival

Clubhouse

COPYRIGHT  2017 RAINBOW PLAY SYSTEMS, INC. ALL RIGHTS RESERVED

RAINBOW RESERVES THE RIGHT TO MAKE CHANGES AND MODIFICATIONS TO THIS PRODUCT.

!

Carnival Clubhouse

Assembly Instructions

5-70-0424

(Rev 1 -3/7/17)

Contains Assembly, Use, and Maintenance Instructions

WARNING: Not suitable for children under 36 months.  Fall Hazard.

Only for domestic use.

To be used under the direct supervision of an adult.  Intended for children ages 3-12.

This owner's manual contains important information about how to assemble, locate, use,

and maintain this playground equipment.  Read this manual before you start assembly.  Follow all 

instructions.  Be sure to educate all children who use this playground and all adult supervisors about 

the rules for safe use that are contained in this manual.

Keep this Owner's Manual for future reference and to remind you of how to safely use and maintain this equipment.

Содержание Carnival series













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды