manualshive.com logo in svg

Rain Bird LXME2, Инструкция по установке, программированию и эксплуатации, Страница: 67 / 91

Поделиться
Скачать
Rain Bird LXME2 Скачать руководство пользователя страница 67

Current Section:

  Flow Sensor   67

 

 

 

 

 

 

Navigation:

13.1.12  FloWatch™ On/Off

1 

Turn the controller dial to Flow Sensor

2 

At the FLOW SENSOR screen, press the   key to select “

Set FloWatch”

, then press 

 Next 

.

3 

At the FloWatch screen, with “

FloWatch On/Off

” selected press 

 Next 

.

4 

Press the On key to turn on FloWatch, or else press Off to disable.

• 

Once FloWatch is enabled we recommend that you Learn Flow or manually enter flow for all stations and 

FloZones if you have not already done so. This will allow FloWatch to react appropriately to the High Flow 

and Low Flow settings.

13.1.13  Set Flow Limits

SEEF

: seek and eliminate excessive flow (High Flow) 

SELF

: seek and eliminate excessive flow (Low Flow)

To most effectively use FloWatch™, you will want to first set your High Flow and Low Flow thresholds 
and actions. SEEF (High Flow) stands for Seek and Eliminate Excessive Flow and deals with how 
you want the controller to respond when excessive flow is occurring, as might be the case with a 
mainline break or a valve which is stuck in the open position. SELF (Low Flow) stands for Seek and 
Eliminate Low Flow and deals with what the controller should do when low flow is present, as might 
be the case during a pump failure, municipal water supply issue or when a valve fails to open.

Содержание LXME2




























































































Отзывы:

Нет отзывов