manualshive.com logo in svg

Rain Bird LXME2, Инструкция по установке, программированию и эксплуатации, Страница: 62 / 91

Поделиться
Скачать
Rain Bird LXME2 Скачать руководство пользователя страница 62

Current Section:

  Flow Sensor   62

 

 

 

 

 

 

Navigation:

13.1.3  Set FloZone Rates

Set Flow Rates

Next

Learn Flow

Set Station Rates

Set FloZone Rates

View Flow Rates

Clear Flow Rates

Set FloZone Rates

Done

FloZone

001

Max GPM

2000.0

Do not set rate 

below 0000.0

MV(s) 1

FS (s) 1

1 

Turn the controller dial to Flow Sensor

2 

At the FLOW SENSOR screen, with “

Set Flow Rates

” selected, press 

 Next 

.

3 

At the Set Flow Rates screen, press the   key to select Set FloZone Rates, then press 

 

Next 

.

4 

The Set FloZone Rates information screen appears; press 

 Next 

.

• 

The LXME2 features one FloZone.

5 

Press the right arrow key to navigate to the MAX GPM field.

6 

Press the   and   keys to set the Max GPM for that FloZone. Press the   and   to 

navigate between the number setting fields.

• 

Press and HOLD keys to accelerate settings.

 NOTICE

Maximum FloZone flow rates are used only by Flo-Manager®. FloWatch is unaffected by user-entered 
FloZone flow rates.

7 

After Flo-Manager® is enabled and station and/or FloZone flow rates are entered, Flo-

Manager® works automatically in the background to run stations based on available 

hydraulic capacity. 

• 

Flo-Manager® can be used with or without flow sensing hardware. If flow sensors are not present it will rely 

on manually entered information; if flow sensors are present it will rely on Learned Flow information, which 

is typically more accurate.

13.1.4  View Flow Rates

Occasionally you may want to view user entered or learned flow rates and their source for a station 
or FloZone.

• 

View Flow Rates does not show actual live flow rates but the expected or learned flow rates by station or 

Содержание LXME2




























































































Отзывы:

Нет отзывов