Rain Bird LXME2, Инструкция по установке, программированию и эксплуатации, Страница: 37 / 91

Current Section: Water Days 37 Navigation:
7.4.2 Cyclic Days
Mode
Mon
Tue
Wed
Thu
Fri
Sat
Sun Yes
Yes
Yes
Yes
Yes
Yes
Yes
PGM01
Cyclic days
Water every 02 days
Start 17 Mar 2022
Allow watering
1
Turn the controller dial to Water Days
2 At the Watering Cycle screen, press the Mode key to navigate to the Cyclic Days screen.
•
If the desired program is not selected, press the
Program Select Button
to choose the desired program.
3
At the Day Cycle screen, press the and key to set the watering day cycle (from 1 to
30 days). For example, set to the day cycle to 03 if you want to water every third day,
then press the key.
4
Press the and keys to set the first date for the Watering Cycle to begin, then press
the key.
•
Press and HOLD keys to accelerate settings.
5
Press the
Yes
key to allow irrigation to start on a given day of the week or else press
No
to
prevent irrigation from starting that day.
6
Press the and keys to navigate through the days of the week.
Press the Program Select Button and repeat this process to select Cyclical Watering for other programs as
desired.