Rain Bird LXME2 Скачать руководство пользователя страница 30

Страница: 30 / 91

Current Section:

Setup 30

Navigation:

Next

Advanced Station Settings

Cycle & Soak

Inter-Station Delay

SimulStations

Station Sequencing

Module/Station Numbering

Done

Type

Irrigation

Non-Irrig

SimulStations

PGM01

Global

PGM

Turn the controller dial to Setup

At the Advanced Station Settings screen, navigate to SimulStations, then press

There are two types of the SimulStations (Global and PGM). Press the and to navigate between
the number setting fields.

Global

- Maximum number (1-5) of simultaneously irrigating irrigation stations across all

programs.

PGM

- Maximum number (1-5) of simultaneously irrigating irrigation stations for the currently

selected program, shown at the top of the screen.

Non-Irrig

- Stations can be setup as non-irrigating (to control lighting for instance).

At the SimulStations screen, press the and buttons to set the number of Global

Irrigation stations (from 1 - 5).

Press the key to continue to the Program (PGM) Irrigation stations.

Press the and keys to set the desired number (from 1 - 5).

Press the Right Arrow key again to continue to the Non-irrigation (Non-Irrig) stations.

Press the and keys to set the desired number (from 1 - 5).

Use the Program Select button to change the program and repeat this process to set the Maximum Number

of Stations for other programs as desired.

4.4.5 Station Sequencing

(Advanced Station Settings)

Station sequencing only works with

Flo-Manager™

turned off. It allows you to optimize water

windows by controlling the sequence in which stations can run. Stations can be sequenced by
Station Number or

Station Priority

Station Sequencing by Station Number

(Default)

Stations will operate in the following order:

Содержание LXME2




























































































Результаты поиска

Содержание LXME2

Отзывы:

Rain Bird LXME2, Инструкция по установке, программированию и эксплуатации, Страница: 30 / 91

Результаты поиска

Содержание LXME2

Отзывы: