NCC-EN 3/10/2018 1:30:22 PM
0.0.0.0
50005
0.0.0.0
0.0.0.0
Configuration Name:
IP Address:
Port Number:
Subnet Mask:
Default Gateway:
MAC Address
Direct Connect on COM1
NCC Type:
NCC-EN
Firmware Version:
v0.31
NCC Serial Number
0xXXXXXXXXXXXX
Read Configuration
Send Configuration
COM Port:
History
Auto Configure
Master Valves
Sensors
FloManager
FloWatch
Edit Configuration and Stations...
Direct Satelitte Tasks
Select One or More Sites...
Site Name
Out of Sync
Satellite Changes
Alarm
Satellites Off
Auto Contacts...
Add Site...
Synchronize
Edit Site...
Retrieve Logs...
Site Name
Description
Time Zone
Postal Code
(UTC-8:00) Pacific Time (US and Canada)
Site 01
OK
Cancel
Satellites
Program...
Dry Run...
Manual Operations...
Configure...
Add...
1. Choose Satellite
2. Choose IQNet Type
LXD
Direct
LXME
Server
LXMEF
Client
OK
Cancel
Auto Configure
Master Valves
Sensors
FloManager
FloWatch
Edit Configuration and Stations...
Direct Satelitte Tasks
Satellite 001
LXME
IP Connection
10.84.177.16
5005
0 gal/min
1
1
Satellite Name:
Type:
Connection Type:
Phone Number / IP Address
Port:
Description:
Dry Run Warning for Max Flow:
Max. Satellite Irrigation SimulStations:
Max. Satellite Non-Irrigation SimulStations:
PIN-Codes:
Weather Source:
Configuration Stations
OK
Cancel
Unprotected
Detect Modules automatically and update IQ
Upload Satelitte Configuration into IQ
Upload Satelitte Programming into IQ
Retrieve Learned Flow Data into IQ
OK
Cancel
Modules
Configuration
Programs
Learned Flow
What’s New
IQ-Cloud Sign Up
IQ-Cloud Login
EN
IQ-Cloud Support
(800) 254-0692 | [email protected]
IQ-Cloud Login
Login
Configure this computer
Rain Bird IQ Central Control System
TM
User Name
Password
I forgot my password
Log On
Cancel
What’s New
Show Quick Start
IQ Solutions
IQ Setup
IQ Downloads
IQNCC Configurator Software
MDS Toolbox 1.03 (40mb)
IQ Set Up & Manuals
IQ Help
IQ-Cloud Support
(800) 254-0692 | [email protected]
1
Ethernet Cable Connections
Work with the Site IT Network
Personnel to setup the following:
A
Setup a Network Static or Reserved IP Address
and a unique Port Number for each IQ Satellite
Controller.
B
Provide the Network Subnet Mask and
Gateway Address.
C
Provide the Internet IP Address for the Router/
Fire Wall.
D
Setup Port Forwarding (or Dynamic DNS) so
IQ-Cloud can connect to the Network Router
and be forwarded to the individual IQ Satellite
Controllers.
NOTE:
Inbound communication from IQ-
Cloud (Amazon Server) to the site network
will come from 50.18.203.7
Rain+Birdt
IQNCCEN Ethernet Network Communication
Cartridge Installation & IQ-Cloud Configuration
For Additional Information
See IQ-NCC Cartridge Installation and
Operations Guide for IQ3G-USA Cellular
and IQNCCRS RS-232 Cartridge Installation
and Configuration Instructions.
Go to www.RainBird.com/
IQ for installation and
configuration instructions
with IQ-Desktop and IQ-
Enterprise Software.
IQ-Cloud Support
(800) 254-0692
I
www.RainBird.com/IQ
Rain Bird Global Service Plan (GSP)
(866) 477-9778
[email protected]
A
The IQ Settings main menu
is displayed. Use the UP or
DOWN arrows to select Setup
Wizard; press Next.
B
The Setup - Satellite Type
screen is displayed. Use + or -
to select Direct' press Next.
g
Turn the controller dial
to ETM/IQ Settings
5
Configure Cartridge
• See User-manual for Server Client Configurations
4
Use the NCC Configurator Software to Configure the Ethernet Settings
6
Go to www.rainbird.com/iq
A
New users: Select IQ-Cloud Sign-up.
B
Existing users: Select IQ-Cloud Login.
7
Select Add Site
8
Select Add Satellite
A
Choose ESP-LX Controller Type.
B
Select Direct IQNet Type.
9
Select Configuration and Stations
A
Select IP Connection type.
B
Enter IP Address and Port Number provided by Site IT Network personnel.
10
Reverse Sync Data from Controller
A
Select Auto Configure.
B
Check All Options.
C
Select Configure this computer for
first time IQ-Cloud connection on a
new computer.
D
Enter User Name & Password to
Logon to IQ-Cloud.
2018 Rain Bird Corporation
t
Registered trademark of Rain Bird Corporation
P/N: 690655-01 Rev. 6/18
2
IQ-NCC Configurator Software
• Go to www.rainbird.com/IQ, download, extract, and install the
so
ft
ware on a Windows computer.
A
Use the UP or DOWN arrows to
select NCC Configurator; press
Next.
B
Confirm that the communication
cables are installed correctly;
press next.
C
Press the ON button to activate
IQ Software Config Mode.
g
Turn the controller dial
to ETM/IQ Settings
3
Set Cartridge to NCC Configurator Mode On
A
Connect supplied Y-Cable
to Cartridge and Null-
Modem Cable to Y-Cable
and Computer Serial Port.
B
Connect supplied Ethernet
Cable to Cartridge and
Ethernet Jack.
Y-CABLE
NULL-MODEM
CABLE
NOTE:
Use a
USB
to SERIAL CABLE
if
computer does not
have a serial port.
A
Launch the NCC Configurator Utility on
the computer.
B
Click the drop-down arrow to select the
computer COM Port number to which the
Null Modem Cable is connected.
C
Click on the Read Configuration button to
retreive the communication configuration
settings from the NCC Cartridge.
• The configuration setting fields will
be blank or contain default values if
the NCC Cartridge has never been
configured previously.
D
Enter/edit configuration settings.
E
Click Send Configuration button to send
configuration to the NCC cartridge.
NOTE:
A Wireless Bridge (Ethernet
to Wi-Fi Adapter) can be used to
connect an IQNCCEN Ethernet
Communication Cartridge to
a wireless network. Download
document "Wireless Bridge
Configuration for Lantronix
SGX5150" for set-up instructions.
