ESP-TM2 Controller
8
EN
Manual Watering Options
Test All Stations
Start watering immediately for all programmed
stations.
Turn the dial to MANUAL STATION.
A
Press or to set a Run Time.
B
Press and hold or turn the dial to AUTO RUN to
start manual station test.
Run a Single Station
Start watering immediately for a single station.
Turn the dial to MANUAL STATION.
A
Press to display the MANUAL STATION screen.
B
Press or to select a Station.
C
Press or to set a Run Time.
D
Press and hold or turn the dial to AUTO RUN to
start the selected Station.
Run a Single Program
Start watering immediately for one program.
Turn the dial to AUTO RUN.
A
Press Program Select to choose the desired
Program (if necessary).
B
Press and hold to start the selected Program.
During Manual Watering:
The display shows a blinking sprinkler symbol, the
active Station Number or Program, and the Remaining
Run Time.
C
To cancel manual watering, turn the dial to OFF
for three seconds until the screen shows OFF.
Normal Operation
AUTO RUN
During watering, the display shows a blinking sprinkler
symbol, the current Program and the Remaining Run
Time.
OFF
Turn the dial to
OFF to stop automatic irrigation or
to cancel all active watering immediately.
NOTICE
Watering will NOT occur if the controller remains in the OFF position.