manualshive.com logo in svg

Rain Bird ESP-LXIVM Series, Инструкция по установке, программированию и эксплуатации

Поделиться
Скачать
Rain Bird ESP-LXIVM Series Скачать руководство пользователя страница 90

90

ESP-LXIVM Series Controllers

Advanced Settings

Store/Recall Programs

The ESP-LXIVM controller comes standard with a simple to use 
backup programs feature.

Backup Programs allows you to save your programs as Contrac-
tor Default and then recall them at a later time. It also includes a 
Delayed Recall feature that lets you save a normal irrigation sched-
ule as the Backup and then restore it later automatically. This may 
be useful for new seed or sod where frequent irrigation can be pro-
grammed to occur until a set date when Delayed Recall automati-
cally returns the controller programming to the normal irrigation 
schedule.

NOTICE

The Backup Programs feature saves and restores ALL irriga-
tion programming in ALL programs.

Store Programs

Turn the controller dial to Advanced Settings

A 

At the IQ / ADVANCED screen, with Store/Recall Programs 
selected, press Next.

B 

At the Program Options screen, with Store Programs selected, 
press Next.

A

IQ / ADVANCED

Next

About this LX-IVM

Configure Cartridge

Factory Defaults

Store/Recall Programs

B

Program Options

Next

Clear Programs

Delayed Recall

Recall Programs

Store Programs

C 

At the confirmation screen, press and HOLD the Yes key for 4 sec-
onds to Store All Programs. If you’re not sure, press No.

D 

A confirmation screen shows the process is running.

C

Store All Programs

Are you sure? Press and hold

Yes to proceed.

Yes

No

D

Store All Programs

Storing...

E 

A confirmation screen shows the process is complete.

E

Store All Programs

Programs Stored

Содержание ESP-LXIVM Series



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды