manualshive.com logo in svg

Rain Bird ESP-LXIVM Series, Инструкция по установке, программированию и эксплуатации

Поделиться
Скачать
Rain Bird ESP-LXIVM Series Скачать руководство пользователя страница 14

14

ESP-LXIVM Series Controllers

2-Wire Devices

LX-IVM 2-Wire Devices attach directly to the 2-Wire path to control 
valves and/or monitor sensors (weather and flow).

Types of 2-Wire Devices

IVM-SOL Integrated Valve Modules

IVM-SOL is used to control compatible Rain Bird Valves such as PEB, 
PESB, PGA, BPES and EFB series. IVM-SOL can be used for both sta-
tion and master valves. Compatible valves are also available with a 
factory installed IVM-SOL.

IVM-OUT (Output Device)

IVM-OUT 2-Wire control devices can be used to control valves with 
DC latching solenoids.

IVM-SEN (Sensor Device)

Flow and weather sensors are connected to the 2-Wire path via IVM-
SEN 2-Wire devices.

IVM-SD (Surge Device)

The IVM-SD provides surge protection for the ESP-LXIVM controller 
and the 2-Wire path.

2-Wire Device Addresses

All LX-IVM 2-Wire Devices have a unique five digit address printed 
on the label of each device for identification on the 2-Wire path.

Local Weather Sensor

A local weather sensor such as a rain shutoff device can also connect 
directly to the IVM 2-Wire Interface Module inside the controller via 
a separate wired or wireless connection.

•  Both the LX-IVM and LX-IVM Pro support one Local Weather Sen-

sor.

Содержание ESP-LXIVM Series



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды