SafeTANK GR8680-TB3 User Manual
4
5. Troubleshooting Fan Errors
If the alarm indicator has lit up red and the audio alarm sounds, this could mean that either a system
fan has stopped operating entirely. When this occurs, you may press the mute button at the rear
of the system to shut off the audio alarm and power off the system immediately if in the allowed
operational state to let the system cool. Check and see if the overall operation environment is well
ventilated and make sure there are no blockages to the enclosed fan and then re-power on the
system to continue use. If the problem persists, please turn off the system and contact your supplier
or the RAIDON tech support for further assistance.
Note: Please avoid using hard disk drives from different manufacturers or different
models from the same manufacturer as this may impact system performance.
Once the hard disk is installed, slide the enclosure into the system and close the handle.
Select the appropriate cable from the accessories pack depending on the interface. Connect
the GR4670-TB3 backplate connection port to the corresponding port on the computer.
Connect the AC Power cable to the GR4670-TB3. Plug the connector into the power socket
then start the system.
Your operating system will automatically detect available capacity once the device finishes
booting. Once the device has been detected, please follow instructions given by the
operating system and format the system. Once the hard disk has been formatted, the
GR4670-TB3 system can be used.
If the computer is unable to detect the system, please install the drivers fromofficial website -
http://www.RAIDON.com.tw/RAIDON2016/download.php
Step 5
Step 6
Step 7
Step 8
Step 9
