Raidon InTANK iR2301, Руководство пользователя

Страница: 4 / 15

iR2300 User Manual
2
LED Indicators :
3. Hardware Requirements and Precautions
1. Computers or servers with SATA I & SATA II & SATA III.
2. Hard drive with SATA I & SATA II & SATA III
3.
You are strongly advised to set the storage mode (the default is the Independent mode) before
using the iR2301.
4. The product allows the user to simultaneously utilize two hard drives manufactured by different
companies. However, if the user expects better efficiency, we strongly recommend the users to
use hard drives manufactured by the same manufacturer.
5. Please make sure that the two hard drives are free from bad blocks or defects prior to installation
in order to avoid system crashes or data loss.
6. The actual storage capacity of iR2301 recognized by the system may differ from the total capacity
stated on the hard drives combined once the drives have been formatted.
7. It is highly recommended for users to back up important data contained within theiR2301 unit on
a regular basis or whenever the user feels necessary to a remote or a separate storage device.
RAIDON will not be responsible for any lost of data caused during the use of the unit or the
recovery of the data lost.
Note :
Once the drive mode configuration has been completed, re-configuration using the same hard
drives to set the drive mode will result in complete data loss. If you must change the drive
mode, make sure to backup all data prior to the mode change.
HDD Idle
HDD Fail or Adsent
HDD Access
Rebuilding(Source)
Rebuilding(Target)
Light On
Light On
Light On
Blue LED
Light On
Blinking
Blinking
On
Red LED Buzzer Status