Raidon GT8670-TB3, Руководство пользователя

Страница: 14 / 32

SafeTANK GT8670-TB3 User Manual
12
9. Frequently Asked Questions
1. If the GT8670-TB3 is turned on, but the Thunderbolt™ cable is not connected, the fan and power
status lights will both be in Sleep mode. The fan and power status light will not come on until the
Thunderbolt™ cable is connected to the computer.
2. When the computer enters into Sleep mode, the fan and power status lights will both be in Sleep
s mode too. The fan and power status light will not come on until the computer is awaken.
3. If a hard disk already contains data from another RAID product or RAID mode has already been set, we
recommend reverting back to JBOD mode before the drive is used with the GT8670-TB3 again to avoid
problems accessing the hard drive.
4. If the GT8670-TB3 is installed on the Windows OS but can not be connected, refer to the following
steps:
B. GT8670-TB3: Let its TB A port connect to Host (PC/Workstation/Server), TB B port to a
monitor, and mDP port to the second monitor.
A. Open the Windows Taskbar.
B. right-click the Thunderbolt™™ icon.
C. Select "Approve Attached Devices".
D. Select the port to which the device is connected.
E. Wait for the dialog box "Approve Thunderbolt™™ ™ Devices" to appear.
F. Select "Always Connect"
G. Press "OK" 。
D
RAIDON tech., GT8670-TB3
A
C
B
E
G
F