RAID N8103-134, Руководство по установке

Страница: 77 / 80

856-127900-408- B
76
3-4-2. Clean Installation <Windows Server 2008 R2>
This section explains how to perform a clean installation of Windows Server 2008 R2.
If the RAID Controller (N8103-134) is used
If the NEC EXPRESSBUILDER provided with the server is Version 5.10-014(5.10-014.05 or later),
5.10-016 or Version 5.10-018 or later, setup according to the
「 User's Guide 」 provided with the server.
If the NEC EXPRESSBUILDER provided with the server is Version 5.10-017, setup according to the
procedure below. And refer to the
「
User's Guide
」
.
If the RAID Controller (N8103-128/G128) is used
If the NEC EXPRESSBUILDER provided with the server is Version 5.10-014(5.10-014.05 or later),
5.10-019 or later, setup according to the
「
User's Guide
」
provided with the server.
If the NEC EXPRESSBUILDER provided with the server is Version 5.10-017 or Version 5.10-018, setup
according to the procedure below. And refer to the
「
User's Guide
」
.
IMPORTANT:
To install Windows Server 2008 R2, you may need to update BIOS.
To check if your system needs a BIOS update, go to:
http://www.nec.com/express/
1. Turn on the system power.
2. Insert the Windows Server 2008 R2 DVD-ROM into the optical disk drive.
3. Restart the system.
To restart the system, press Ctrl + Alt + Del or turn off the system once, and then turn it on again.
IMPORTANT :
When prompted to [press any key to boot from CD or DVD], press Enter while the message is
displayed.
If the Windows installation screen (shown in step 4) does not appear, turn off the system, and then
turn it on again.
The DVD-ROM starts. A message 「 Windows is loading files … 」 appears.
4. Select a language and other options from the drop-down lists, and then click [Next].
5. Click the [Install now] button.
The installation starts.