RAID N8103-134, Руководство по установке

Страница: 72 / 80

856-127900-408- B
71
3-3-2. Clean Installation <Windows Server 2008>
This section explains how to perform a clean installation of Windows Server 2008.
If the RAID Controller (N8103-134) is used
If the NEC EXPRESSBUILDER provided with the server is Version 5.10-014(5.10-014.05 or later),
5.10-016 or Version 5.10-018 or later, setup according to the
「 User's Guide 」 provided with the server.
If the NEC EXPRESSBUILDER provided with the server is Version 5.10-017, setup according to the
procedure below. And refer to the
「
User's Guide
」
.
If the RAID Controller (N8103-128/G128) is used
If the NEC EXPRESSBUILDER provided with the server is Version 5.10-014(5.10-014.05 or later),
5.10-019 or later, setup according to the
「
User's Guide
」
provided with the server.
If the NEC EXPRESSBUILDER provided with the server is Version 5.10-017 or Version 5.10-018, setup
according to the procedure below. And refer to the
「
User's Guide
」
.
1. Turn on the system power.
2. Insert the Windows Server 2008 DVD-ROM into the optical disk drive.
3. Restart the system.
To restart the system, press Ctrl + Alt + Del or turn off the system once, and then turn it on again.
4. Select a language and other options from the drop-down lists, and then click [Next].
5. Click the [Install now] button.
The installation starts.