Radwin WinLink 1000 Скачать руководство пользователя

Страница: 132 / 211

RADWIN Manager Traps

Chapter 7

RADWIN 1000/2000/5000 User ManualVersion 2.5.30p3

7-12

Setting the Events Preferences

You can define a color for the traps to be displayed in the Event Log win-
dow, according to the severity of the event. The severity is predefined.



To set the trap color:

1. From the Tools menu, choose Preferences.

The Preferences dialog box appears.

2. Click the Events Tab:

The Manager identified a newer ODU release at both

sites.

Warning

The Manager identified a newer ODU release at the

<local_site_name> site.

Warning

Newer Version identified at the <local_site_name>

site.

Warning

ODU release is newer than

NMS release. Wizards are

not available. NMS will be

used just for monitoring.

Upgrade the NMS

Newer Version identified at the <remote_site_name>

site.

Warning

Newer Version Identified!

Warning

Table 7-5: RADWIN Manager Trap Messages

Trap Message

Severity

Remarks

Содержание WinLink 1000




















































































































































































































Результаты поиска

Содержание WinLink 1000

Отзывы:

Похожие инструкции для WinLink 1000

Бренды по названию

Популярные бренды

Radwin WinLink 1000, Руководство пользователя

Результаты поиска

Содержание WinLink 1000

Отзывы:

Похожие инструкции для WinLink 1000

Бренды по названию

Популярные бренды