Radwin RW 2000 Series Скачать руководство пользователя страница 58

Страница: 58 / 127

Page 58

June 2023

Corporate Headquarters | T. +972.3.766.2900 | E. [email protected] | www.radwin.com

Lightning Protection Units (LPUs)

The design of all installations must include the appropriate addition of both ground bonding
and surge/LPUs to better protect equipment and reduce network outages.

•

RADWIN recommends using two LPUs for each ODU installation: one near the ODU
and one near the PoE.

•

Make sure the LPU is oriented with the cable glands oriented towards the bottom.

•

Mount one LPU near the ODU, and the second near the PoE:

3.10.2

Grounding the ODUs

1. Connect a ground cable to the ground connection on the ODU as shown Grounding

the ODUs.

3.10.3

Mounting and Connecting the LPUs

1. Mount and connect the LPUs as described in Mounting and Connecting the LPUs .

Содержание RW 2000 Series
































































































































Результаты поиска

Содержание RW 2000 Series

Отзывы:

Radwin RW 2000 Series, Руководство по установке, Страница: 58 / 127

Результаты поиска

Содержание RW 2000 Series

Отзывы: