Radwin 2000+ SERIES, Руководство пользователя

Страница: 109 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 6 ‐ 26
Configuring AES 256 Encryption Support
5. Copy and Paste the license keys into a plain text file and save it to a safe known
place.
6. Open the Configure | Operations tab for either radio unit.
Figure 6 ‐ 13: Using the Master ODU (HBS) Configuration button for licensing
Check the License File button and navigate to the file you saved in the last step.
7. Click Activate . The next time you enter the Change Bands tab, the new bands will
be available.
6.3.4 Configuring AES 256 Encryption Support
AES 256 support is available for the RADWIN 2000 C+ only.
AES 256 support is enabled from the RT ‐ A(HBS).

To enable AES 256 Encryption support for a sector:
1. Ensure that the RT ‐ A(HBS) is hardware ready for AES 256: From the HBS Configura ‐
tion button, open the Inventory page and check that the hardware version is 9 or
higher. Open a text file and copy/paste the serial number of the RT ‐ A(HBS) to it.
2. Repeat step 1 for the RT ‐ B(HSU).
3. Save the text file and send it to your equipment supplier with your license purchase
order.
4. You will receive by return email a text attachment showing serial number and
license key. Save the file to a known safe location.
5. At either ODU, open the Configuration | Operations tab. Check the License File
button and navigate to the file you saved in the previous step.
6. Click Activate . Yo can confirm activation by opening the Security tab. The AES 265
check box, previously grayed out, is now available.
You may see error messages in the Status Column such as Band not
supported or Serial not found . Supported bands typically reflect your
local regulations. Check missing serial numbers with RADWIN Customer
Service.