manualshive.com logo in svg

Radware Alteon, Инструкция по применению

Поделиться
Скачать
Radware Alteon Скачать руководство пользователя страница 771

 

Alteon Application Switch Operating System Application Guide

Bandwidth Management

Document ID: RDWR-ALOS-V2900_AG1302

 

771

Bandwidth Management Information

Statistics are stored in the individual Switch Processors (SP) and then collected every second by the 
MP (Management Processor). The MP combines the statistics, as statistics for some classifications 
may be spread across multiple SPs.

Viewing BWM Statistics

The 

/stats/bwm/dump

 command displays the total number of octets sent, octet discards, and 

times over the soft limit are kept, for each contract. The history buffer maintains the average queue 
size for the time interval and the average rate for the interval.
Packet counters also maintain bandwidth management statistics for packets on a per-contract basis 
as well as calculation of the average packet size.

Configuring BWM History

History is maintained only for the contracts for which the history option is enabled, using the 

/cfg/

bwm/cont x/hist

 command.

Sending BWM History

The MP maintains global statistics, such as total octets, and a window of historical statistics. When 
the history buffer of 128K is ready to over flow, it can be sent from Alteon using either an e-mail or 
direct socket transfer mechanism.

To configure sending Bandwidth Management statistics

1. Select the statistics delivery method. Bandwidth Management statistics can be sent through e-

mail or by socket to a reporting server.

—

To send BWM statistics through e-mail, issue this command:

—

To send BWM statistics by socket to a reporting server, issue the following commands:

BWM statistics are sent to TCP port 49152 of the specified reporting server.

2. Configure the selected delivery method.

—

To configure e-mail usage, issue these commands:

>> Main# /cfg/bwm/email enable

>> Main# /cfg/bwm/email/ disable

(E-Mail statistics delivery must be 
disabled)

>> Main# /cfg/bwm/report <Reporting Server IP Address>

>> Main# /cfg/bwm/user <SMTP User Name>

>> Main# /cfg/sys/smtp <SMTP host name or IP address>

Содержание Alteon











































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды