manualshive.com logo in svg

Radware Alteon, Инструкция по применению

Поделиться
Скачать
Radware Alteon Скачать руководство пользователя страница 70

Alteon Application Switch Operating System Application Guide

 

Securing Alteon

70

 Document 

ID: 

RDWR-ALOS-V2900_AG1302

Caution:

If you configure the  secret using any method other than a direct console 

connection, the secret may be transmitted over the network as clear text.

3. Optionally, you can change the default TCP port number used to listen to .

The well-known port for is 49.

4. Configure the number of retry attempts for contacting the server, and the timeout 

period.

5. Apply and save the configuration.

Secure Shell and Secure Copy

The Telnet method for managing Alteon does not provide a secure connection. Secure Shell (SSH) 
and Secure Copy (SCP), however, use secure tunnels so that messages between a remote 
administrator and Alteon is encrypted and secured.
SSH is a protocol that enables remote administrators to log securely into another computer over a 
network to execute management commands.
SCP is typically used to copy files securely from one computer to another. SCP uses SSH for 
encryption of data on the network. Alteon uses SCP to download and upload the Alteon configuration 
via secure channels.
The Alteon implementation of SSH supports both versions 1.5 and 2.0, and supports SSH clients 
version 1.5 to 2.x. The following SSH clients have been tested:

•

SSH 1.2.23 and SSH 1.2.27 for Linux (freeware)

•

SecureCRT 3.0.2 and SecureCRT 3.0.3 for Windows NT (Van Dyke Technologies, Inc.)

•

F-Secure SSH 1.1 for Windows (Data Fellows)

•

Putty SSH

•

Cygwin OpenSSH

•

Mac X OpenSSH

•

Solaris 8 OpenSSH

•

AxeSSH SSHPro

>> Server# secret 

Enter new secret: <1-32 character secret>

>> Server# port Current port: 49

Enter new port [1-65000]: <port number>

>> Server# retries

Current  server retries: 3

Enter new server retries [1-3]: 

(Server retries)

>> Server# time

Current  server timeout: 4

Enter new server timeout [1-15]: 10

(Enter the timeout period in minutes)

Содержание Alteon











































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды