manualshive.com logo in svg

Radware Alteon, Инструкция по применению

Поделиться
Скачать
Radware Alteon Скачать руководство пользователя страница 502

Alteon Application Switch Operating System Application Guide

 

Health Checking

502

 Document 

ID: 

RDWR-ALOS-V2900_AG1302

Pre-defined Health Check Summary

The following table details all available out-of-the-box health check objects:

>> # /info/slb/real 1

  1: 205.178.13.223, 00:00:5e:00:01:24, vlan 1, port 2, health 4, up

     real ports:

     script 2, up, current

Name

Description

link

Verifies the status of the interface using the monitored element to 
which it is connected. This type of health check is relevant only for 
monitoring IDS servers.

arp

Monitors server availability using ARP requests.

icmp

Checks connectivity to the monitored element using ICMP.

tcp

Monitors a TCP service by sending simple TCP requests to the server 
port (rport) of a virtual service.

udp

Monitors a UDP service by sending a combination of ICMP requests 
and simple UDP requests to the server port (rport) of a virtual 
service.

http/https

Sends an HTTP or HTTPS request to the Web page defined in the 
virtual service (hname and dname) and group (content) and expects 
a 200 response code.

dhcp

Sends a DHCP request determined by the health check content 
configuration in the monitored group. 

dns

Sends a DNS query for domain name configured in the group health 
check content to standard TCP DNS port (53). 

udpdns

Sends a DNS query for domain name configured in the group health 
check content to standard UDP DNS port (53). 

ftp

Attempts an anonymous login to the FTP server and retrieval of the 
filename configured in the group health check content. 

imap

Attempts to login to the IMAP server on the standard port (143) 
using the user and password configured in the group health check 
content. 

ldap/ldapss

Attempts to login into an LDAP or LDAPS server and retrieve data 
using the parameters configured in the group health check content.

nntp

Attempts to access the NNTP server on the standard port (119) and 
retrieve the identification line of the newsgroup configured in the 
group health check content.

pop3

Attempts to login to the POP3 server on the standard port (110) 
using the user and password configured in the group health check 
content.

radius-auth

Sends RADIUS authentication request using the parameters values 
configured in the group health check content and secret.

radius-aa

Sends a RADIUS accounting request.

Содержание Alteon











































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды