RADWAG UYA 4Y, Руководство пользователя

Страница: 109 / 196

- 109 -
Where:
Batch number – identification of controlled products batch
Bach quantity – software controls specified number of samples
Average tare determining
Quantity of packages
– more than 10
4. Remove load from the weighing pan.
5. Press START soft key located in a bottom of the parameters settings window. The
software proceeds to the main window of product control, used for entering data.
Caution:
If before control:
•
Load has not been removed from the weighing pan or if other zeroing requirements have not been
fulfilled (e.g. unstable indication), balance shows message: <-Err 2>. Upon noticing <-Err 2> message
unload the balance and wait until all zeroing requirements are met.
•
You have not logged in or you are logged but not assigned with the right access to perform control, then
message: “No authorization” is displayed.
•
You have not selected the product out of database, a message: “Product is not selected” is displayed.
28.6. ABORT CONTROL PROCEDURE
Procedure:
1. Press (ABORT CONTROL) soft key to abort control procedure.
The following message is displayed:
2. Press button to return to the ongoing control. Press button to abort control,
program returns to Prepacked Goods Controls working mode.
Control report with status <ABORTED> is saved to < Prepacked Goods Controls> database.
28.7. ABORTED CONTROL RESTORING PROCEDURE, POWER LOSS CASE
In case of disconnection from the mains, to prevent loss of data for control being in progress,
program continuously keeps records of control results.