- 6 -
1. INTENDED USE
Scales of TMS series with TERMINAL E2R EWIDENCJA are intended to
be used for measuring and at the same time recording the data in local
database or on server. The application is especially important when the
weighed products are not directly related one to another by any common
data or they are not a part of the weighing process with its beginning and
end, for example deal or order. The net of scales connected together
enables transmitting the measurement results to the main database
installed on server.
2. PRECAUTIONS
A. Please, read carefully this user manual and use the device according
to its intended use;
B. Weighed loads should be placed in most possible central part of
scale pan;
C. Do not clean the device with agents causing corrosion;
D. Gross mass of goods loaded on weighing pan should be lower than
maximal capacity of the scale;
E. Do not leave heavy loads on the pan for long time;
F. In case of failure, scale power supply should be disconnected
immediately;
G. Devices that are to be withdrawn from usage should be utilized
according to the law regulations.
3. WARRANTY CONDITIONS
A. RADWAG is obliged to repair or exchange those elements that appear
to be faulty because of production and construction reasons,
B. Defining defects of unclear origin and outlining methods of their
elimination can be settled only in presence of a user and the
manufacturer representatives,
C. RADWAG does not take any responsibility in case of damages or
losses caused by non-authorized or inappropriate production or
service procedures,