RADWAG MAS 1. Y, Руководство пользователя

Страница: 76 / 201

- 76 -
Procedure:
1. Press grey workspace area.
2. The following submenus are displayed: Settings, Buttons, Information,
Printouts, Profile.
3. Select <Settings> menu.
4. Functions related to formulations are displayed.
Functions:
−
Automatic ingredients naming :

YES

NO
−
Apply tare from database :

YES - each ingredient has a tare value assigned (the value is assigned on
the basis of data for a particular product saved to the products database);

NO - tare is not applied
−
Means of ingredient verification :
Use this function to specify how to determine ingredient mass during formulation
making process,
by
TOLERANCE or by THRESHOLDS .
TOLERANCE : the software accepts mass of an ingredient as correct if it is within
set percent tolerance of total ingredient’s mass (±%) - (data acquired from
database of products).
THRESHOLDS : the software accepts mass of an ingredient as correct if it is within
set thresholds (data acquired from database of products).
Specified method is in effect for all ingredients in the formula making process.
If during formulation making process one of the ingredients is weighed in excess
(its mass is out of high tolerance limit) the following message is displayed upon
ingredient weight confirmation: <VALUE OUT OF RANGE. RECALCULATE THE
FORMULATION?>. Confirm, the software automatically recalculates mass of other
ingredients so that the mixture proportions are correct.
In order to make THRESHOLDS option active, the product/ingredient related data
in database must correspond with value selected for <MEANS OF INGREDIENT
VERIFICATION> parameter, e.g. ingredient thresholds are specified and
<THRESHOLDS> value is selected for <MEANS OF INGREDIENT
VERIFICATION> parameter, otherwise particular ingredients mass recalculation is
not possible, i.e. ingredient thresholds are specified and <TOLERANCE>
parameter is selected for <MEANS OF INGREDIENT VERIFICATION> parameter.
−
Multiplier's editing :
Function designed to enable making multiple mixtures according to a selected
formulation in a single weighing process:

YES - on selecting a formulation for processing the software requests for
multiplier’s value, the provided value is in effect for all ingredients in the
formulation making process, i.e. each ingredient is multiplied by the value.

NO - multiplier value is disabled, default value is set to <1>.
−
Printout :
for information on how to operate this function read section 15.7 .
22.2. Formulations – Quick Access Buttons
Each working mode features automatically displayed set of default on-screen quick access
buttons. The set can be modified, i.e. you can add out-of-list quick access buttons to it. Such
operation requires particular permissions level.