RADWAG MAS 1. Y, Руководство пользователя

Страница: 26 / 201

- 26 -
To set time interval for automatic adjustment:
•
Select <Automatic adjustment time> option.
•
Using displayed menu, select appropriate time interval (given in hours) which is to
elapse between the most recent adjustment and activation of the following automatic
internal adjustment.
CAUTION:
This parameter settings can be modified only for balances that are not a subject to the
conformity assessment (verification).
10.7. Scheduled Adjustments
< Scheduled adjustments> parameter allows you to precisely specify time for
adjustment performance and interval between successive adjustments. The parameter is
not connected with automatic adjustment and its criteria (time, temperature). You can
schedule when internal and external adjustment are to be performed. In order to design
schedule for external adjustment, it is necessary to record mass standards for adjustment
performance into balance memory.
Procedure:
Prior setting adjustment schedule, enter data of mass standards intended for external
adjustment performance.
Enter operator menu, select <Adjustment> submenu and find < Adjustment weights>
parameter. Enter weight data:
Enter operator menu, select <Adjustment> submenu
and find <Scheduled adjustments> parameter.
Enter <Scheduled adjustments> parameter, wait for
‘Scheduled adjustments’ window to open, add
adjustment procedures. Remember, only Administrator
can add new entries.