34
18.2. Working Mode Local Settings
Each working mode features specific (local) functions which enable to
customize scale operation. To go to local settings of each working mode enter
<P3.Func>
submenu. Some specific functions are common for all working
modes, see the below table:
Accessibility
Save mode
Time interval
LO threshold
Weighing
3.1.1.Acc
3.1.2.Snn
3.1.3.Int
3.1.4.Lo
Weighing with Peak Hold
3.8.1.Acc
-
-
3.8.2.Lo
BMI determination
3.9.1.Acc
-
-
3.9.2.Lo
The table presents special function number and name common for each of the
working modes. Remaining specific functions referring directly to a given
working mode are described further down this user manual.
18.2.1. Working Mode Accessibility
To enable/disable a given working mode, press
key.
Procedure:
Enter
<P3.Func>
menu and select a given working mode.
Go to
<Acc>
function.
Press
key, parameter values are displayed successively one by one,
where:
YES
– working mode enabled,
no
– working mode disabled.
Press
key to confirm, next go to the home screen.
18.2.2. Save Mode
Parameter allowing to set mode of sending data from the scale to a peripheral
device.
Procedure:
Enter
<P3.Func>
menu and select a given working mode.
Go to
<Snn>
function.
Press
key, parameter values are displayed successively one by one,
where:
