Field Name
Description
Use Default NTP
Server
If your organization uses an external Network Time Protocol (NTP)
server for synchronizing the system clock, select
Yes
. If your
organization uses one or two internal NTP servers for that purpose,
select
No
and enter the server IP address in fields
Server 1
and/or
Server 2
.
Refresh time
Indicates the period of time after which the system contacts the NTP
server to refresh the clock.
3. From the web interface only, select
Save
.
Setting the Time Zone
About this task
You can set the time zone from your endpoint or the Scopia XT Series web interface.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the Scopia XT Series Locally from the Endpoint
on page 73.
Procedure
1. Access the time zone settings as follows:
• From the XT Series web interface, select
Administrator Settings > System > Date &
Time > Time Zone
.
• From the endpoint's main menu, select
Configure > Advanced > System > Date &
Time > Time Zone
.
You need to enter the PIN required to access the
Advanced
settings. The default PIN
is 1234.
2. Configure settings as described in
Table 17: Configuring time zone related settings
on page
97.
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 96
