RADVision Scopia XT5000 Series, Руководство по установке

Страница: 24 / 184

Figure 11: Using a NAT and Firewall Traversal Server
Configure the traversal server as the XT Codec Unit gatekeeper and enable the H.460 option.
Configure the XT Codec Unit to the IP address of the traversal server Scopia PathFinder.
• Using the XT Series for NAT and firewall traversal
In cases where your organization has no sophisticated firewall protection, the XT Series can
straddle the two network zones using the two network ports provided on the XT Codec Unit (see
Figure 12: Using XT Series for NAT and Firewall Traversal on page 25).
Use the GLAN ports of the XT Codec Unit simultaneously and connect one port to the public
network and the other to your private network. All communication passes through the XT Series
which acts as the virtual conference room for all the endpoints.
Important:
The second GLAN is an optional feature for selected models (for details, see Installing and
Enabling Licenses which Extend System Functionality on page 76).
Installation Guide for Scopia XT5000 Series Version 3.2 Planning the Topology of the Scopia XT Series Deployment | 24