Table 31: Configuring H.323 settings
Field Name
Description
H.323 Name
The H.323 name or ID (alias) used to register the unit with the
gatekeeper.
When connecting over H.323, this name is displayed on the
monitors participating in the videoconference (for example:
John-Smith
, or
9th-Floor-Room
, or
NY-Office
).
E.164
The E.164 number used to register the unit with the
gatekeeper.
Refuse calls by IP
Address
Select
Yes
to allow only endpoints registered to the
gatekeeper to call your endpoint.
3. From the web interface only, select
Save
.
4. Select
Gatekeeper
under
H.323
.
Figure 79: Configuring the Gatekeeper settings from the web interface
5. Set the fields as described in
Table 32: Configuring the gatekeeper
on page 128.
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 127
