Procedure
1. Access the user PIN settings, as follows:
• From the endpoint's main menu, select
Configure
>
Advanced > Utilities > PIN
Protect Settings > Basic Settings
.
You need to enter the PIN required to access the
Advanced
settings. The default PIN
is 1234.
• From the XT Series web interface, select
Administrator Settings > Utilities > PIN
Protect Settings > Basic
.
Figure 70: Modifying the user PIN
2. Set
Enable
to
Yes
.
3. If you previously set a user PIN, enter it in the
Old PIN Code
field.
4. Enter your new 4 digit PIN code.
From the web interface only, re-enter your new PIN in the
Confirm PIN Code
field.
5. Save your changes as follows:
• From the endpoint, select
Done
.
• From the web interface, select
Save
.
Use this new PIN the next time you are required access basic settings.
Setting Call Answering Preferences
About this task
This procedure describes how to define your preferences when receiving calls. By default, the endpoint
never answers calls automatically. You can configure the system to, for example, always automatically
answer calls when the endpoint menu is displayed on the Scopia XT Executive monitor. If you enable
automatic answering, you can define the number of rings until the system automatically answers the call.
You can do this procedure from the endpoint itself or from the XT Series web interface.
User Guide for Scopia XT Executive Version 3.2
Customizing Your User Experience | 90
