Figure 3-1
This Side Up symbol
Caution
The accessories kit is situated on top of the device inside the shipping box and
can be damaged if the box is placed upside down. Pay attention to the This
Side Up symbol on the shipping box to handle the box correctly at all times.
Caution
To prevent injury and equipment damage, follow lifting guidelines described in
the Safety Guide when lifting or moving the shipping box.
Step 3
Cut the plastic straps.
Caution
The plastic straps are tightly stretched and can hit you when you cut them. To
avoid this, make sure you do not face the side of the box secured by the straps
before you cut the straps.
Step 4
Cut the strapping tape.
Step 5
Open the shipping box.
Step 6
Take the accessories kit out of the shipping box.
Step 7
Take the device out of the shipping box.
Step 8
Carefully open the additional boxes, remove the packing material, and remove the drives and
other contents.
Note
We recommend that you keep the packaging materials in case you need to repack
the device.
Step 9
After opening the shipping box, check the shipment is complete. Compare the contents of the
shipment with your packing list.
Inspecting for Damage
After you verify that all of the equipment is included, carefully examine the power supplies
and cables for any damage resulting from shipping. If you suspect any damage from shipping,
contact your local freight carrier for procedures on damage claims. If you observe any physical
defects in the items you ordered, contact RADVISION Technical Support for Return Material
Authorization (RMA) form.
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
Preparing the SCOPIA TIP Gateway Setup | 9
