RadiSys EPC-2102 P5000HX2 Series, Руководство по обслуживанию, Страница: 36 / 44

EPC-2102 Single-Board Computer
26 Service Manual
Specifications
Overview
Listed in the table below are system specifications and environmental tolerances for the
EPC-2102 series SBC.
Note: These specifications are subject to change without notice.
Environmental
Table 8. Environmental Tolerances
About Thermal Data
RadiSys validates the operating specifications of its products by testing with the most
demanding hardware and software configurations to maximize the power supply draw and
generate a worst-case scenario. Despite these efforts, the specifications outlined above are
only benchmarks and should be regarded as such.
Figure 9. The EPC-2102 Series SBC
Temperature Operating: 0 to +60 °C (32 to 140 °F)
Non-Operating: -40 to +70 °C (-40 to 158 °F)
Humidity Operating: 5 — 95% @ 40 °C, non-condensing
Non-Operating: 0 — 95% @ 40 °C, non-condensing
Shock Operating: 1.25 G @ 10 ms (10 G in appropriate chassis)
Non-Operating: 30 G @ 10 ms (40 G in appropriate chassis)
Vibration Operating:. 1 G @ 5 — 100 Hz
Non-Operating: 5 G @ 5 — 200 Hz
Altitude Operating: 15,000 ft (4,572 m)
Non-Operating: 50,000 ft (15,240 m)
The SBC requires a minimum airflow of 200 linear feet per minute (LFM) unimpeded across
the CPU within 5 to 60 °C (41 to 140 °F) ambient temperature. Operations outside these
specifications could void the warranty.
!
StockCheck.com